Not allowed here. Please check PM.
Please would u mind sharing? Thanks
1 Like
Hello !
I’m also interested in having the MF key of JCM Tech…
Thanks a lot !
1 Like
Official firmware devs already have access to this info/keys so it’s up to them now to implement them (or not) on flipper official firmware. Regards.
1 Like
I just checked the frame and it is from an AZKOYEN controller manufactured by JCM TECH
1 Like
Yes, it is.
I am interested in having the program to program the PIC16F630 of the AZKOYEN receiver.
Due to a programmer error (manufacturer) the KeeLoq counter is lost…
1 Like
Counter isn’t an issue as long as you still have original remote.
Those machines don’t care about counter at all. You only need to send a single valid code even if it was already sent… You need to have correct key on reciever that match remote. Just that.
1 Like
Hi, Portuguese here too. Mind sharing? Thanks.
Please check PM !
Hello Spildit, c
Hello all,
Can il have jcm Keys for garage Doors wirh Rolling code please ?
Thanks
What a careless implementation. Who are these people? Honda? 
/teasing
It’s available on non-official firmware. Just check firmware repository and you will find it.
1 Like
Hi Spildit!
Thank you so much for knowledge sharing.
can I have MF key of JCM Tech Please 
? THANKS !
it’s available in non-official firmware not supported here. simply goolge for it.
also for those machines you don’t need the rolling code at all. as long as you have a single valid keeloq code you are ok so you can simply record a raw signal from a valid remote and use that as long as you want.
They don’t care about security, the more someone bypass it the better as they will selll more tobacco lolololioliol
it’s just done to prevent kids from using the machine.
1 Like
Hello, I need the MF from JCM TECH, where could i get it?
Thanks in advance
“un****” non official firmware …
KeeLoQ protocol codes?
What ???