Went to update, followed all troubleshooting and still crashing.
hopefully my log will help, I’m still pretty new with debugging but I’m trying to learn.
Running KDE Plasma linux.
323 [APP] qFlipper version 1.3.0 commit 01fcfec9 2023-03-27T03:51:38
323 [APP] OS info: KDE Flatpak runtime 5.15-21.08 5.13.0-valve36-1-neptune Qt 6.4.3
341 [REG] Detected new device: VID_0x483:PID_0xdf11
520 [DBG] Device reported transfer size: 1024
523 [DBG] Bytes uploaded: 32 100%
523 [DBG] Upload has finished.
525 [REG] Registering the device
525 [BKD] Current device changed to “Ouxixtle”
597 [UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
8361 [UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
8375 [DEV] Full Repair @Ouxixtle START
10163 [ZIP] Uncompressing file with size of 173151 bytes…
10165 [ZIP] Uncompression finished : No Error
10879 [ZIP] Uncompressing file with size of 197621 bytes…
10895 [ZIP] Uncompression finished : No Error
11678 [RCY] Set Recovery boot mode @Ouxixtle START
11685 [DBG] Device is not idle, resetting…
11732 [DBG] Device reported transfer size: 1024
11735 [DBG] Bytes uploaded: 128 100%
11735 [DBG] Upload has finished.
11735 [DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
11740 [DBG] Device is not idle, resetting…
11777 [DBG] Device reported transfer size: 1024
13060 [DBG] Failed to perform control transfer: LIBUSB_ERROR_NO_DEVICE
13060 [DBG] Unable to get device status
13060 [DBG] An error has occurred during download phase
13060 [DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
13060 [DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
13060 [DBG] Failed to release interface: LIBUSB_ERROR_NO_DEVICE
13060 [DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
42600 [RCY] Timeout with an online device, assuming it is still functional
42611 [RCY] Set Recovery boot mode @Ouxixtle SUCCESS
42613 [RCY] Co-Processor Firmware Download @Ouxixtle START
42623 [DBG] Unable to open device: LIBUSB_ERROR_NO_DEVICE
42624 [RCY] Co-Processor Firmware Download @Ouxixtle ERROR: Can’t start FUS: Failed to initiate transaction.
42624 [DEF] “Co-Processor Firmware Download @Ouxixtle” failed with reason: “Can’t start FUS: Failed to initiate transaction.” Attempting to install the firmware anyway…
42631 [RCY] Firmware Download @Ouxixtle START
42700 [REG] Device went offline: VID_0x483:PID_0xdf11