Just received flipper one today, I downloaded qflipper to perform update. Tried to run the update it fails. Checked DFU in FS (Device Manager) - Windows 10. Using STM Driver 1.1.0.0.
The first time around I didn’t have a MicroSD card in, the second time I did. Looks like getting the same errors no matter what I have tried.
btw had to change out http for hxxp cause i cant post to many links as new user.
[APP] qFlipper version 1.0.1 commit beb47b7f 2022-04-06T06:16:06
[APP] OS info: Windows 10 Version 2009 10 10.0.19043
[UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Registering the device
[BKD] Current device changed to “Or1sha”
[UPD] Fetched update information from hxxps://update.flipperzero.one/qFlipper/directory.json
[UPD] Fetched update information from hxxps://update.flipperzero.one/firmware/directory.json
[DEV] Full Repair @Or1sha START
[ZIP] Uncompressing file with size of 168698 bytes…
[ZIP] Uncompression finished : No Error
[ZIP] Uncompressing file with size of 25537 bytes…
[ZIP] Uncompression finished : No Error
[RCY] Set Recovery boot mode @Or1sha START
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 128 100%
[DBG] Upload has finished.
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Device is not idle, resetting…
[DBG] Device reported transfer size: 1024
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] An error has occured during download phase
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[REG] Device went offline: VID_0x483:PID_0xdf11
[RCY] Set Recovery boot mode @Or1sha ERROR: Failed to set Recovery mode: operation timeout
[DEV] Full Repair @Or1sha ERROR: Failed to set Recovery mode: operation timeout
[BKD] Current operation finished with error: “Failed to set Recovery mode: operation timeout”
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[BKD] Finalized current operation
[REG] Device disconnected: VID_0x483:PID_0xdf11
[BKD] Last device was disconnected