Im trying to capture this remote

I am trying to capture this remote.

https://apps.fcc.gov/eas/GetApplicationAttachment.html?id=4736342

I am using sub 1 GHz, I set it to 915 MHz (spec says its 916), and cycles through all 4 mopdulations.

Is there any hope? Did they just use a non-standard modulation?

That link is not helpful. When clicked I just get “You are not authorized to access this page.”

You are right! Its totally not! It used to work… grrr

1 Like

OK so I don’t see bhow to link directly to the search results at FCC. So here is the test report. its 916MHz, but I can’t capture any thing from the remote for any of the modulations.
GetApplicationAttachment.html.pdf (4.7 MB)

1 Like

Did you try the frequency analyzer?

Try frequency analyzer like mentioned and RAW capturing the signal.

And if you know for sure it is 915 MHz, set exactly 915 MHz - modify subghz/assets/setting_user.

OK, I used the frequency analyzer. I can see when I press the button. But its the same issue, I tried all the modulations, but recording the button press, and sending it out doesnt work.

Seems it may be using some other modulation, or some non-flipper protocol. Does anyone have another suggestion on how to proceed?