Thanks for the confirmation 
Now we have a single confirmed packet that works. This will help a lot with my arduino transmitter
Regards
1 Like
Hi all
I used the following code on an WeMos Mini Pro ( based on ESP8266 ) and its working OK for group 1,2,3 .
Practically the code has the values for a single packet ( from the SUB files that @niltefa provided ) as arrays and toggles the DATA pin low or high depending on the values from the array.
The protocol is not decoded ( we dont know how the data for X color/effect is encoded ) … we just use the values blindly ( just like flipper does )
The 433 MHz transmitter ( FS1000A ) Data pin is connected to D3 on WeMos
int array_greenYellow[] = {
-574,577,-208,361,-176,353,-176,379,-176,377,-174,
375,-174,337,-208,371,-174,371,-174,205,-196,217,
-180,339,-196,361,-202,201,-194,217,-180,215,-180,
361,-174,249,-180,213,-182,209,-162,215,-182,223,
-202,215,-182,379,-176,205,-192,359,-174,253,-176,
329,-194,355,-202,333,-204,335,-208,337,-206,371,
-174,205,-196,217,-180,215,-178,361,-210,213,-182,
211,-180,343,-206,335,-206,339,-206,203,-196,359,
-172,217,-214,329,-196,355,-202,333,-206,335
};
int array_red[] = {
-562,611,-198,349,-200,329,-204,337,-206,335,-208,
335,-208,339,-208,337,-208,337,-208,337,-206,205,
-194,337,-190,369,-192,195,-184,211,-212,359,-176,
197,-216,185,-212,335,-194,369,-188,341,-196,357,
-202,335,-208,337,-208,337,-208,339,-206,337,-206,
205,-196,337,-190,367,-192,195,-182,369,-192,367,
-192,199,-220,181,-210,193,-218,325,-216,173,-202,
217,-182,339,-198,359,-204,333,-208,337,-208,337,
-208,337,-208,337,-206,205,-194,361,-174,215
};
const uint8_t outPinTo433TransmitterData = D3;
#define pause_between_effects 1000
void setup() {
pinMode(outPinTo433TransmitterData,OUTPUT);
// LOW ,to clear any previous effects
digitalWrite(outPinTo433TransmitterData,LOW);
delayMicroseconds(pause_between_effects);
}
void loop() {
// Repeat code 5 times since receiving IC might be sleeping
for (uint8_t x = 0; x < 5; x++){
//green yellowish
for (int i = 0; i < sizeof(array_greenYellow) / sizeof(array_greenYellow[0]); i++) {
int value = array_greenYellow[i];
if (value < 0) {
digitalWrite(outPinTo433TransmitterData, LOW);
delayMicroseconds(abs(value));
} else {
digitalWrite(outPinTo433TransmitterData, HIGH);
delayMicroseconds(abs(value));
}
}
digitalWrite(outPinTo433TransmitterData, LOW);
delayMicroseconds(1000);
}
delay(pause_between_effects);
// Repeat code 5 times since receiving IC might be sleeping
for (uint8_t x = 0; x < 5; x++){
//red
for (int i = 0; i < sizeof(array_red) / sizeof(array_red[0]); i++) {
int value = array_red[i];
if (value < 0) {
digitalWrite(outPinTo433TransmitterData, LOW);
delayMicroseconds(abs(value));
} else {
digitalWrite(outPinTo433TransmitterData, HIGH);
delayMicroseconds(abs(value));
}
}
digitalWrite(outPinTo433TransmitterData, LOW);
delayMicroseconds(1000);
}
delay(pause_between_effects);
}
Thank you once again @niltefa
Regards
1 Like