[EDIT] - Fixed. I was able to successfully repair it on windows. not exactly sure what the root issue is. However, if you come across the same issue on mac & closing the app, pushing the firmware file, etc doesn’t work then I would recommend tieing the usb to a windows VM or native system altogether.
Hi,
I’m on Mac trying to update the firmware once and it failed. Now when I attempt to repair it also fails. Cant use the flipperzero anymore, its completely bricked up. The device is completely unresponsive, doesn’t power on or respond to resets.
Any insights on how to resolve this issue would be appreciated.
==== Short Logs
[RCY] Set Recovery boot mode @Wamdiso ERROR: Can't set boot mode: Failed to initiate transaction.
[DEV] Full Repair @Wamdiso ERROR: Can't set boot mode: Failed to initiate transaction
===== Long Logs
263170 [REG] Detected new device: VID_0x483:PID_0xdf11
264945 [DBG] Device reported transfer size: 1024
264945 [DBG] Bytes uploaded: 32 100%
264945 [DBG] Upload has finished.
264946 [REG] Device went back online
264947 [DBG] Received a DeviceInfo too early, queueing it...
281767 [REG] Detected new device: VID_0x483:PID_0xdf11
282018 [DBG] Device reported transfer size: 1024
282019 [DBG] Bytes uploaded: 32 100%
282020 [DBG] Upload has finished.
282021 [REG] Device went back online
282021 [DBG] Received a DeviceInfo too early, queueing it...
284334 [BKD] Finalized current operation
286391 [UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
286475 [DEV] Full Repair @Wamdiso START
287147 [ZIP] Uncompressing file with size of 165029 bytes...
287150 [ZIP] Uncompression finished : No Error
287396 [ZIP] Uncompressing file with size of 30681 bytes...
287399 [ZIP] Uncompression finished : No Error
287661 [RCY] Set Recovery boot mode @Wamdiso START
287662 [DBG] Unable to open device: LIBUSB_ERROR_NO_DEVICE
287662 [RCY] Set Recovery boot mode @Wamdiso ERROR: Can't set boot mode: Failed to initiate transaction.
287662 [DEV] Full Repair @Wamdiso ERROR: Can't set boot mode: Failed to initiate transaction.
287662 [BKD] Current operation finished with error: "Can't set boot mode: Failed to initiate transaction."
===== Screenshot
=====
Attempting to do it from a firmware file (flipper-z-f7-full-0.57.0.dfu) results in the following error:
[RCY] Firmware Download @Wamdiso ERROR: Can't flash firmware: An error has occurred during the operation.
[DEV] Firmware install from file @Wamdiso ERROR: Can't flash firmware: An error has occurred during the operation.
If you require any additional information please let me know im unsure how to proceed this article no longer exists to im at a real loss for direction https://docs.flipperzero.one/basics/firmware-recovery