What about read raw ? Does it capture anything of use from those fobs ?
I have one of these fobs and it’s now reading 125 kHz RFID. Woohoo! Will try to see if emulation works later today.
Ive just tried my paxton fob and its still not picking it up
I got mine working as well, and tired the emulation today and the door unlocked.
Can anyone explain how they succeed to read their paxton keyfob?
I tried with mine, it’s an old model but i can’t read anything from it.
Nothing is picked up.
Is there some tricks or some tips to do to get it copied?
I’m on latest rogue firmware. Tried also with latest official firmware
Thanks
Ok, Probably that we are using an old system.
It seems not all of them can work:
https://badcfe.org/how-to-flipper-a-paxton
hi Colleagues,
I’ve collected raw files for rfid of my Paxton Net2 fob by flipper.
is it possible to extract Paxton tag from those files and use it for How to open a Paxton Door with a Flipper Zero ?
You should send the files to @Astra to see if support can be implemented on flipper for that card type.
Hi everyone,
I have a Paxton fob cloner which can copy within seconds. If anybody needs a duplicate, feel free to drop me a message! 
I’m new to this forum, is there any way I can directly message you
The Flipper Zero will never read and write a Paxton Hitag2 fob or card.
It cannot hold the 2-way communcations required.
There is only one copier available that can do this, the PX1 Paxton Duplicator.
It is only available from major UK locksmith distributors, Keyprint, Davenport Burgess etc.
It will. Implementation have already started.
Implementation by who?
When will it be completed?
Ever?
The Paxton question has been asked since July 2022.
Great! Any updates so far?
Also just got my flupper and was trying to do a Paxton. Any help?
As folks above have said My Net2 Paxton Key fob is easy to read and emulate with a Flipper.
I used RFID 125 kHz to read, save and emulate with no issues.
Yeah just reading the tread for the first time but its a classic LF tag, no biggie for a FZ or pm3
Paxton emulation works well if you emulate a EM4100, the issue is that the Flipper won’t read the Paxton fob and won’t convert to an EM4100-equivalent. The Proxmark3 can do that (with a few manual steps), is it possible for the Flipper to do it too, if we create an app/write some code?
There seems to be confusion around Paxton fobs and Paxton Net2 fobs.
Fob versions:
Net2 fob data produces an 8 decimal digit Net2 number. Net2 readers are multi format, they read Hitag2, EM4100, Mifare.
The Net2 system takes no account of which reader format was used to produce the Net2 number.
So, a Net2 number can be emulated with Flipper, or copied to an Em4100 or Mifare.
Switch2 fobs are different, they hold a site code, pack code, token number and configuration data about its token type, colour, etc. It cannot be emulated with Flipper, or copied with a token of any other type except a Hitag2.