Request to SkorP - WS :

Requesting an option on Weather Station to import RAW files and decode them for the WS…

For example if i SAVE a RAW with data that is from a known WS the option for the WS app to decode the file and show the values on the app, like a Sub-Ghz decoder … Also option on CLI to do the same as command to decode SubGhz packets from READ RAW…

it doesn’t make any sense at all. there is no sense from the decoded temperature signal after a while.

If you did record a signal in raw and you don’t know what the signal is or if you download the signal from someone on the net it might be of interest to get info that the signal is from a wether sensor when decoding … Like you analyze the signal on CLI to know what the signal is …

It would make sense because you might have saved files that are captures of sensors and you are not aware of that …

I do not get the point of it

Ok, so i’m going to ask another thing …
Application like Flipper WS but for CARS … Car fob decoder/save/replay at least for fixed codes.

expensive

Not expensive if people share their own fob captures and also if one buy used key/fobs out of ebay…

Example :

I think many people would love to have an app like this !

Even if it does support only one or two car brands to start / test so that people can add to it later … WS app doesn’t support all sensors in the world as well.

I’m freedom good or expensive for the customer

Ok, thanks.